Inventory Unit Detail
2021 Kohler Engine Command PRO CH270
$462.87
Key Features
New/Used New
Availability
In Stock
LocationGilles Brothers, Inc.
Condition
Excellent
Product Features
Description
COMMAND PRO CH270
This is what it takes to be a PRO. Performance-driven features like a heavy-duty air cleaner, forged-steel crankshaft, electronic ignition and cast-iron cylinder liner. KOHLER® Command PRO® is the standard for professional-grade power and performance.
Features
- Quad-Clean™ all-season four-stage cyclonic air filter - effective engine protection for tough-and-dirty conditions
- Large-capacity fuel tank means more time working, less time filling
- Power or repower your equipment without expensive modifications
Specifications
- Engine type: 4-cycle, gasoline, OHV, cast iron cylinder liner, aluminum block
- HP: 7 HP (5.2 kW)
- Displacement: 12.7 cu. in. (208 cc)
- Bore: 2.8 in. (70 mm)
- Stroke: 2.1 in. (54 mm)
- Gross Torque: 10.5 ft. lb. (14.2 Nm)
- Compression Ratio: 8.5:1
- Dry Weight: 38.7 lb. (17.5 kg)
- Oil Capacity: 0.63 US qt.(0.6 L)
- Lubrication: Splash
- Dimensions LxWxH: 12.7 x 15.2 x 14.2 in.
- Backpressure Limit: 30
- Certified Power: 6.6 HP (4.9 kW)
- Certified RPM: 4000
- Emissions Compliance: CARB Phase III; EU Stage V; EPA Phase III
- Engine Type: Commercial
Equipment Types
- Hydraulic Power Pack
- Stump Grinder
- Lawn Vacuum
- Blower
- Ground Pounder
- Concrete Screed
- Go-Kart
- Aerator
- Chipper
- Concrete Saw
- Compressor
- Edger
- Pressure Washer
- Welder
- Generator
- Pump
- Tiller
- Log Splitter
- Cement Mixer
- Concrete Trowel
NOTES:
Length is PTO to recoil cover. Width is fuel tank to muffler. Height is from mounting surface to top of muffler.
Power (HP) and Torque (ft. lb.) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.
Backpressure Limit expressed in Inches of H20 @ 3600 RPM WOT
J1995 power and torque certified by 3rd Party WitnessEngine
Engine Type | 4-cycle, gasoline, OHV, cast iron cylinder liner, aluminum block |
Bore x Stroke | 2.8 x 2.1 in. (70 x 54 mm) |
Displacement | 12.7 cu. in. (208 cc) |
Compression Ratio | 8.5:1 |
Horsepower | 7 HP (5.2 kW); Certified: 6.6 HP (4.9 kW) |
Torque | 10.5 ft. lb. (14.2 Nm) |
Dimensions
Length | 12.7 in. |
Width | 15.2 in. |
Height | 14.2 in. |
Weight | 38.7 lb. (17.5 kg) |